Ana içeriğe geç

Neye ihtiyacın var

Bu teardown bir tamir kılavuzu değildir. Uniden EXP 371 cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. Uniden EXP 371 Teardown, Uniden EXP 371 Teardown: adım 1, 1 resimden 1.
    • Uniden EXP371 900 MHz Cordless Phone.

    • 900 MHz Extended Range with One Touch RocketDial/Find Handset Locator and is Desk or Wall Mountable.

  2. Uniden EXP 371 Teardown: adım 2, 2 resimden 1. Uniden EXP 371 Teardown: adım 2, 2 resimden 2.
    • Remove the battery by first pressing down on the rear of the cover and pushing the cover towards the bottom of the phone.

    • Next remove the battery by pulling on the connector.

  3. Uniden EXP 371 Teardown: adım 3, 2 resimden 1. Uniden EXP 371 Teardown: adım 3, 2 resimden 2.
    • Next remove the two screws at the bottom of the phone with a PH1 philips screwdriver.

    • Now remove the top portion of the case from the bottom. This may be difficult to do with your bare hands. The use of a plastic opening tool may come in handy.

  4. Uniden EXP 371 Teardown: adım 4, 3 resimden 1. Uniden EXP 371 Teardown: adım 4, 3 resimden 2. Uniden EXP 371 Teardown: adım 4, 3 resimden 3.
    • Your next step is to remove the five screws holding down the motherboard. Use the PH1 philips screwdriver.

    • Once you have removed the five screws you may lift the motherboard off of the front case.

    • At this point you may also remove the dial pad. It simply lifts off.

    • You may also remove the speaker if needed by unscrewing the two screws using the PH1 philips screwdriver.

    • The whole phone is now disassembled at this point.

Tim Reimer

Üyelik tarihi: 06/19/10

165 İtibar

3 adet Kılavuz yazıldı

Bir Yorum

this guide is poorly written, please delete or improve it.

Walker Quine - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 4,566