Ana içeriğe geç
Yardım
Adım 6 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Remove circuit boards by pulling the top and bottom lever out simultaneously to disconnect the backplane connection.

When the card is disconnected from the backplane, slide the board out of the cage and store it in a safe place.

The safest place to store a circuit board is inside the machine. If a board needs to be stored outside of the machine, place it in a shielded, conductive bag, and wrap it in bubble wrap.

It is easier to remove a board next to an empty slot. If a board is sandwiched, especially the memory board (first slot) or display generator board (last slot), remove the adjacent board first.

When all boards have been removed, admire the backplane and blower.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.