Ana içeriğe geç
Yardım
Adım 11 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

Removing the Voltage Regulator Module.

This board is called the DC/DC board, or the Voltage Regulator Module. It takes the power from the power brick and regulates the power to different components of the Cube.

First, disconnect the power connector.

Then release the white clip on the connector socket, which is accessed from the side of the core.

With a little persuasion, the board comes out of it's socket(it's hard to show how the board comes out, but in person, it's pretty self explanatory)

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.