Ana içeriğe geç
Yardım
Adım 9 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

In my case, the speaker wires had already come loose from dropping the speaker a number of times, but you may have to slide some scissors in there to cut your speaker free. All the excess speaker wire is in the circuit board area and that hard adhesive keeps any of the slack from going into the speaker cavity.

The speaker terminals are marked + and - and the wires are red and blue. Red goes to + and blue goes to -.

And there you have it. A disassembled ThunderMAX Bluetooth Speaker. Hope that helps.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.