Ana içeriğe geç
Yardım
Adım 10 Düzenleniyor —

Adım Tipi:

Yeniden düzenlemek için sürükleyin

The screws holding in the drive were deep within the casing.

Once those screws were removed, the entire case could be lifted off.

Don't pull too hard! There are two cables attaching the drive to the logic board underneath.

This wire slid out from its horizontal slot. Once it was detached, the ribbon cable came out as well.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.