Ana içeriğe geç

Neye ihtiyacın var

Bu teardown bir tamir kılavuzu değildir. iControl Networks Piper cihazınızı onarmak için, servis kılavuzumuzu kullanın.

  1. iControl Networks Piper Teardown, Cracking Open The Case: adım 1, 1 resimden 1.
    • Piper is held together with four "security Philips" screws located in the battery case. Each screw has a post in the middle, meant to foil use of a standard screwdriver. However....

    • If you don't have the right bit, just use a large #2 philips head screwdriver: the bit won't go deep enough to get tangled up in the security feature.

    • Once the screws are out use a plastic spludger to pry open four plastic clips holding the shell together.

  2. iControl Networks Piper Teardown, What's Inside: adım 2, 3 resimden 1. iControl Networks Piper Teardown, What's Inside: adım 2, 3 resimden 2. iControl Networks Piper Teardown, What's Inside: adım 2, 3 resimden 3.
    • Piper is dominated by a large speaker, and a Mallory PS-953Q security horn. It's loud. The CPU is a Texas Instruments TMS320DM365 media processor with a ZW0301 based Z-Wave module.

    • Piper uses two tiny antennas, one for Z-Wave one for WiFi.

    • That's it... a pretty simple layout.

Bryce Nesbitt

Üyelik tarihi: 11/30/14

1.023 İtibar

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 27

Her zaman: 2,148