Bu kullanıcı henüz profilini doldurmadı.
Sorular
Hello, My client has the Lenovo F0D3 and it is stuck on the Lenovo screen boot loop. All attempts to safe boot, boot to...
Devamını okuHello, I have been reading a lot about this topic of black screens on Macs. My case seems to be different. My screen works...
Devamını okuHello all, I have this Sony Xperia z1 conpact that was completely destroyed. I got new screens and chassis and rebuilt the...
Devamını okuHello, someone has brought me a phone that cannot load the camera. It says "Warning: camera failed" . The camera comes up...
Devamını okuHello all, Im posting to ask how to fix a problem with a Samsung Galaxy S7 32GB Gold. The phone is displaying that its...
Devamını okuHello all, I have dug around online and cannot find what I need. Its the piece the charger connects to, that sits inside...
Devamını okuHello, I buy/sell and fix smart devices and recently have noticed a lot of iPhone 6 suddenly stop working. Even with a new...
Devamını okuHello, I just replaced the battery on my Mac. Mac model a1398 with battery model a1417 because I thought that was the...
Devamını okuHello all, I am contacting to ask why the home button does not work when clicked, but the finger print scanner still...
Devamını okuHello all, I am here to ask how I reboot my samsung galaxy s4 that has a red screen of death. Basically I cannot download...
Devamını okuSayfa 1 / 3
Cevaplar
The ear spekaer part isnt included in any tutorial I've found. Help?
Devamını okuThis is a strange issue,.. if you cant switch it off & back on while holding the home button (for DFU/reset via itunes) than my advice is to let the phone die, and then once you know its dead, plug into itunes and either hold the home button until the phone turns on, or find a way to clamp the button. As for the stripped screw, I find sometimes a small flat head to get it out a bit works, and if its possible, grip the screw with tweezers to twist it out.
Devamını okuMake sure the wifi on your modem is switched on, and if it is still not coming up after restarting both devices, try a ethernet cable first?
Devamını okuI have attempted to resolder the battery connect on, and out of the 4 gold tabs on the back, ive managed to knock one off and loose it... Does this mean the logic board is completely f'd now or can I just tack it to where the gold thing use to be ? The only problem I had is the solder was not staying melted with a soldering iron. Maybe a hot air gun would be better, or low melt alloy...
Devamını okuZsTech
@zstechfix
235
İtibar
4
Çözümler
0
Kılavuzlar
Üyelik Başlangıç Tarihi 04/25/16
Oy
8
0