Ana içeriğe geç
Eşyalarını Tamir Et
Onarma Hakkı
Mağaza
Yardım
Geri
Üyeler
Hakkında
İtibar
Hernando Berg
Hernando Berg
47
İtibar
1
Çözüm
0
Kılavuzlar
Üyelik tarihi: 30-07-2016
Takım
T&T PARTS
Oy
4
0
Sorular
Operating system not found
27-06-2019
Hello, I replaced the hard drive on a Acer Aspire V5-571 due to the old one crashed and couldn’t boot anymore. It was a...
iPhone 6 dead after touch ic repair
05-12-2018
Hello, I got a iphone 6 in that worked fined except for touch issues. Each time the touch came unresponsive, i only had to...
iPhone 6 plus no signal after touch ic repair
07-11-2018
Hello, I have a iphone 6 plus that had a touch ic disease so replaced the chip and made the M1 jumper. The phone works...
Remote controller battery problem
09-10-2018
Hello, I got a phantom 4 pro in for repair last week and it seems to be working fine except the battery for the remote...
Screen flickering, white and blue lines
23-08-2018
Hello, I got a iPhone 6 in these days that had screen flickering and touch faliure sometimes and had white or blue lines...
Doesn't boot after touch ic replacement
08-05-2018
Hello, I replaced the touch ic on a iphone 6 plus and now when i try to boot the phone, the apple logo apears for like...
Kenmore fridge compressor not starting
20-08-2017
Hello, My Kenmore 70443 fridge suddenly started getting warm one morning. I've been diagnosing for a whole day now and...
iPhone 5s not charging
17-05-2017
I got in a Iphone 5s that's not charging. The charging symbols pops up when i plug in the cable but then it doesn't even...
Help with backlight replacement
21-02-2017
Hello, It's my first time trying to replace a backlight filter and i kinda ripped off on of the pads while taking the old...
Not charging after port replacement
28-01-2017
Hello, I got a Galaxy Grand Prime in today with a broken charging port but after replaceming it, it still doesn't charge....
Sayfa 1 / 2
Sonraki
Cevaplar
"Camera failure when I install screws" için yanıt
20-02-2017
I was able to get mine to work, had to file down everywhere around the vibrator because it didn't fit exactly but now it works perfectly fine. The issue was that one was a sprint logicboard, the other an AT&T.
Zaman içindeki itibar
İtibar Dağılımı
Etkinlik
Sayı
Delta
Gönderi olumlu oylandı
3
36
Kabul edilen cevap
1
10
Rozetler
Popüler Soru
(1)
Erman Toroğlu
(1)
Öğrenci
(1)
Popüler Soru
(1)
Erman Toroğlu
(1)
Öğrenci
(1)
Popüler Soru
(1)
Erman Toroğlu
(1)
Öğrenci
(1)
1671538