Took me an hour and a half, the hardest part is the usb removal and the vibrator motor + power button, as they have stickers. Then there is something to be careful about, the removal of the front camera + light sensor: there is a 'holding part' that is clipped above, and it's not obvious that it's separated from the camera and sensor below - careful not to lift the camera before unclipping this. The rest is quite easy.
This tutorial is incomplete, for instance the 'vibrator motor' removal does not specifies that this also removes the power button, and the removal of the front camera and light sensor is omitted, and the fact that heating the usb port part is very helpful if not mandatory before lifting it. I followed the video tutorial here which is complete: Samsung Galaxy Note 3 Display Assembly Video Tutorial Replacement
Bu gerçekleştiğinde, zaman içinde kazandıkları itibarı gösteren grafiği görüntüleyebileceksiniz.
Grafiğin nasıl görüneceğine dair bir ön izleme:
Henüz itibar kazanılmadı.