Cihazlarınız için kılavuz, parça ve cevaplara hızlı erişim edinin
Sepetiniz boş görünüyor
SOLUTION I THOUGHT OF:
I have the Mac Pro 1,1 (2006) and needed to remove HD 1 (near the fan). Instead of removing my secondary HD 2 next to it first, I used the metal cover to ease it out.
After opening the side cover, just slide the strongest corner below the lip of the hard drive and gently use it to loosen the HD if you cannot readily pull it out with your fingers. It took me 10 seconds to loosen then slide it out.
I am trying to remove the HD from the most left bay (I have a secondary HD next to it). The left most one you red squared (also a newer one) will not "slide out" as you write. Is there a bolt or screw holding it intact I am missing?