Takım Etiketi: BU-WHITNEY-S17S3G1
the screen is still connected by the pink and white wires that go into the hinge. probably need to add steps until complete removal
indicate that the video cable will be a pull and will not slide off super easily
need to use markup for screws and indicate length. also maybe be more specific that you need to switch to other side of screen.
indicate length of screws and that they are the two outer screws.
we used "plastic opening tool" instead of metal spudger and it worked better and didn't scratch the computer. also maybe add more detail, such as slide along the seam around the entirety of the cover. we also needed to use opening tool to loosen near hinge. it would not have come off had we not tried to work around plastic on hinge.
maybe instead of "with the screen on a flat surface" say "tilt screen backwards as far as it can go" or something to that effect. also indicate screw length
name screw length
rename tool with a standard link for easier accessibility
didn't mention length of screws
The ribbon mentioned is attached to a ZIF connector, so need to guide through removal from ZIF
Sayfa 1 / 2
Bu gerçekleştiğinde, zaman içinde kazandıkları itibarı gösteren grafiği görüntüleyebileceksiniz.
Grafiğin nasıl görüneceğine dair bir ön izleme:
Henüz itibar kazanılmadı.