There are 2 things that may be the issue. First things first. When it comes to buttons on ribbon cables on handheld systems, most ribbon cables use a common ground which would eliminate an unconnected ground. Since the power button does not work but the volume buttons work that eliminates a bad ground. My guess would be that the pin on the connector on the main board may be slightly corroded or the original ribbon cable is slightly torn. I would double check under a magnifying glass or a microscope (if you have one) to see if you can see any broken traces or tears in the ribbon cable as that would cause your issue. The second possibility (less likely) is that the original cable is serially paired to the handheld and if that is the case no other cables would work with it.

Its not an OS issue, its a camera firmware issue. Yes they are compatible for the most part however they are only truly compatible with the use of a programmer. what you need to do is program the new camera housing using the information from the old camera unit that originally came with the iPhone SE when you purchased it. If you don't have the original part anymore then I would recommend contacting Apple and getting the part from them. They have started offering genuine replacements for certain parts like the front panel screen and cameras for multiple models. It will be more expensive going that route however since you have already opened the device and replaced the camera before, apple will no longer honor your warranty, not even if you are currently paying a monthly fee every month for AppleCare+. Hope's that helps

Are you trying to replace the analog assembly or just the plastic thumb stick that your thumb rests on?

In regards to this issue your having, if you are able to connect a controller using the USB ports and it connects without issue then the USB Ports are good and in working order. The PlayStation's OS is setup to only allow music and video playback through a USB drive. any other file types on the drive are not supported by the OS. They did that purposely to elevate game piracy. There is an alternative to allow you to play game backups and homebrew however, use a mod chip to modify the system to allow homebrew and backups. If you have any further questions regarding anything regarding electronics, Contact us on our website at CERLV.com

If you are having issues with a couple keys on your keyboard the most likely culprit is the keyboard controller either on the logic board or on the keyboard itself. If it’s on the logic board then you will need to have one soldered on the logic board for you if you don’t feel safe (or don’t want to) doing it. If the controller is on the keyboard itself then you would need to replace the keyboard to fix that issue. Word of wisdom, depending on the model MacBook you own may require you to replace the entire upper frame as Apple has recently (within the past 5 or so years) began to make the keyboard and upper frame a single unit. I would recommend taking your machine to a laptop repair shop in your area that provides free diagnostics for additional assistance in this matter.

If the SIM card is not being detected by the phone anymore there may be 2 reasons why, first reason is that when it was dropped a cable that runs from the phones main circuit board to the SIM card tray has fallen off or has a loose connection. Most newer phones have the SIM card slots part of the main circuit board. In which case it is possible that when you dropped the phone you may have damaged the pins on the SIM card slot. If you do have dual SIM card slots on your phone I would recommend swapping the SIM card to the other slot. Also if you SIM card is an older card, you may want to contact your carrier for a replacement SIM card

It must be a super fast charger capable of delivering at least 39 Watts of power. As long as it can 15volts at 2.6 Amps or higher your good. Also be sure to use a charger with a USB-C plug and get a cable that is rated for at least 15volts as those cables can keep up with the current needed to charge the switch lite. Optionally you could go to your local game supply store such as GameStop(us) or EBGames (ca) for a direct replacement if you want

if it went through the dryer as well as the washer then it cooked the battery and must be replaced. theres a place in nevada that can do it if you live in nevada if you don't then you'll just have to replace the device with another one

you need to reopen the iPhone and check all the cables to make sure that none of them got unplugged, if they did, that could explain a lot of your problems, even if 1 cable is unplugged it could be your problem, even if its at the bottom of the iPhone

When a Sad face with an online support website comes on it means that your iPod logic board is fried and it cannot be used any more which means that you have to replace the logic board or go and buy another iPod