Don't confuse the torq-set bit #6 to a torx T6 bit. They are different and the torx T6 bit will not work.

The display is coming off instead of the back panel. Do you have any suggestions if this happens?

Reassembly Warning: Be careful routing the cables through the frame. The digitizer cable tears easily. The LCD cable has the square shield. So, the digitizer cable is the cable without the shield. On the digitizer cable there is a section where the cable is wide then it gets more narrow. Where it tapers down (gets narrow) the cable can tear at this point. If the digitizer cable is torn the touch screen feature will not work.

I would love to see the Apple Tv 2 remote tear down