Sayfa 1 / 4
"iPhone in boot loop when charger connected after screen replacement" için yanıt@imicrosoldering I had the same problem and I replaced both the screen and the battery. Any others idea?
"Lock function inoperative after screen replacement" için yanıtHi Ryan, I have the same problem. After a screen replacement on my iPad Air: 1. the lock function with original Apple iPad Air Smart Cover don't work; 2. the lock function with the power button don't work; 3. the lock function with Assistive Touch don't work!!! The flex power cable is undamaged. I'm going crazy..... so, Ryan, have you fixed your issue? And if you fixed it, how? Thanks in advance Mauro
"Disconnected battery to force shut down, now just apple bing." için yanıtDear Detailedby, did you solve the problem? I'm searching to fix a battery issue after a screen replacement (battery don't charge even if the charge symbol is OK; I have not disconnected the battery connector during fixing) Thank you everyone in advance, Mauro ju Macniaco
"Which parts are required to complete a screen replacement" için yanıtI use the old bezel too (only if it is in Good condition). And you, you too or not? Thanks, Mauro Ju Macniaco
"replace the hard drive, how do I connect Hard Drive thermal sensor?" için yanıt"jump the connectors works fine after that." How can I jump the connectors? Jump the connectors means this: