Brayden S

Just happened a few minutes ago. The iphone was hot to the touch, so I put it on my table while listening to music, a few...

I ordered a Iphone se about a month ago because my iphone 7 has audio ic issues and I cannot afford much. I also wanted a...

Switching out batteries last night and I one caught fire. Long story. I cannot order parts at this time so I have a iPhone...

I have restrictions on my iphone 7 and i just updated groupme, and now i cant open videos or open source links like the...

I have a iphone se that I posted about earlier, ill put the link in the description. I watched a video of a person...

I have a hp split x2 13 m010dx that has a i3-3229Y that runs at 1.4Ghz and im trying to get 1.5GHz or 1.6GHz, I am on a...

I have a hp split 13 x2 m010dx and it doesnt have a good processor that will do much, I am on a tight budget and I cant...

I fixed an iphone se from another account by typing in the original password, It does not have a camera, mic or that...

Have an iPhone 7 and thinking about getting extended capacity battery but I know some are just fakes, but is there really...

I just rewired the leds on the drone to where they light up again, it has been a while since use. When I power it up it...

fixed it, for some reason the phone wasn’t recognizing the battery after removing it and replacing it with the other one it recognized it. Both batteries work now

go for ebay, although cheapest price may get you a lower quality repair. However if you add apple verified then its approved for repair of the phone

Okay I’ve done more research, aparrently I do need a board 3 18650 batteries will only make 3.7v I need a board to make them all work I needed a minimum of 12v of power

Simple, your screen wasn’t Apple certified if it was, it wasnt

You have a blown speaker, replace it or turn it in for repairs

It is possible, but you you need to find a working logic board, although you may have problems in the future

Check to see if you can charge something through the USB ports, if you can then it’s probably a usb issue or bios won’t boot from it, if they don’t, there might be a blown fuse somewhere

I overheard a guy talking about something you add on refrigerator to prevent that from happening , ask something like a heat module to prevent condensation

yes, it is possible, I own one of these laptops too and it works

if you have a soldering iron and the port is just loose, just solder it back together, however if it is damaged you will have to buy the port off of ebay or someplace like that f you think if you have the skills to repair it. however if you dont, i advise you bring it in to a repair shop