Dan

@welchd

Dan

2.532	İtibar
81	Çözüm
6	Kılavuzlar
Üyelik tarihi: 18-02-2019

I like to tinker and take things apart

Oy

Üzerinde Çalıştığım Teardown'lar

Kingbox (Generic Android) Teardown

Expansion Teardown

Blink Sync Module 2 Teardown

Kılavuzlarım

MacBook Air 13" Early 2015 SSD Upgrade to NVMe

Ensure NVMe Compatibility with MacBook Air SSD Replacement

MacBook Air 13" Early 2017 SSD Upgrade to NVMe

Katkıda bulunduğum Kılavuzlar

Nikon Coolpix 5600 Camera Back Removal

Nikon Coolpix 5600 Screen Bracket Replacement

Lenovo Y410P LCD Replacement

How To Perform an Oil Change and Oil Filter Replacement-Nissan Sentra 2007-2012 Oil, Oil Filter Replacement

Çevirisine yardım ettiğim kılavuzlar

N131WU SSD

Mac Pro 2009-2012 Case Replacement

Favori Kılavuzlarım

MacBook Air 13" Early 2015 SSD Replacement

Tamamlanmış Kılavuzlar

MacBook Air 13" Early 2015 SSD Upgrade to NVMe

MacBook Air 13" Early 2015 SSD Replacement

Sorular

Panasonic RP HD 305 Wont turn on, unless recently plugged into usb. 20-09-2019
Panasonic RP HD 305 won’t turn on unless it has been recently plugged in. (last 1-2 mins). ( Power button does nothing )...

Cevaplar

"Why will my chromebook not charge" için yanıt 21-12-2020
Have you tried a different charger to confirm its not that? if so, try Disconnecting and reconnecting the battery by following the guide below. Dell Chromebook 11 CB1C13 Battery Replacement
"Can I swap iPhone 8 housing to 8plus?" için yanıt 21-12-2020
Without some extreme modification, it would not be possible, the board as made for each phone size. Best simply replace the bad part. You may be able to take you bricked iphone 8 plus to a repair store and trade for the replacement piece Take a look iPhone 8 : iPhone 8 Teardown iPhone 8 Plus: iPhone 8 Plus Teardown
"My zippi fan fell off my desk, and no longer works." için yanıt 20-09-2019
Try listing to the motor when you turn in on, depending on the damage you could have simply pent something preventing the motor from turning. If this is the case, try to repair the damage. if it is not the case, you can open it up and pull out your multi meter, see where the power issue is. Finally if no power issue a motor may need to be replaced
"My laptop has been locked all by itself" için yanıt 20-09-2019
If you are unable to get access, you may need to reinstall the OS. Double check to ensure your computer was not subject to a takeover and ensure you’ve update your protections to prevent future takeovers
"How to remove a broken sim card tray from the phone?" için yanıt 20-06-2019
If tweezers don’t work, you can open it up, you could also try a bent needle or something small like a paperclip Samsung Galaxy S8 Teardown'ı
"How to patch my goretex jacket" için yanıt 20-06-2019
Most basic repair would be some fabric repair tape on both sides ( if possible). Proper repair would be to get a Gortex fabric patch. https://www.mec.ca/en/explore/how-to-repair-a-torn-waterproof-jacket-or-pants
"Teardown for Google Home Hub" için yanıt 18-06-2019
Yeah that would be awesome!
"Not connecting to my device" için yanıt 04-06-2019
Try reinstalling the software, you likely lost the driver at some point. if you have the original CD, best start there and work your way up, also look at the update logs to ensure the most recent software version supports your device.
"Do it your self LCD replacement guide" için yanıt 01-05-2019
The d5000 and s5100 both have a replacement guide and should be similar to a degree, if you end up proceeding with the replacement please document it and create a guide for future users.
"Why does my brush roller stop turning when I move the handle from the" için yanıt 11-04-2019
Based on what you’ve described it could be a bad connection or damaged wire. try investigating the wire. Also ensure there is no fail safe that requires you to restart the brush when moving from upright to normal position. some vacuums have this.

Sayfa 1 / 9

Ensure NVMe Compatibility with MacBook Air SSD Replacement 21-12-2020

Sorry for the late reply, I cant see why it would not work, did you give it a shot?
Ensure NVMe Compatibility with MacBook Air SSD Replacement 27-04-2020

Did the bootable disk see the SSD?
Ensure NVMe Compatibility with MacBook Air SSD Replacement 27-04-2020

Thanks for the update!
Ensure NVMe Compatibility with MacBook Air SSD Replacement 27-04-2020

High sierra should not be an issue as others has confirmed this working, the adapter is “Sintech NGFF M.2 nVME SSD Adapter Card for Upgrade
MacBook Air 13" Early 2017 SSD Upgrade to NVMe 27-04-2020

Thanks Max, what are you computer specs?
MacBook Air 13" Early 2017 SSD Upgrade to NVMe 20-09-2019

Hey Rako, that one wont work, needs to be PCI - E style, see the one linked at the top
MacBook Air 13" Early 2017 SSD Upgrade to NVMe 03-09-2019

Hey Tyson, you will certainly notice a speed difference, depending on the drive you chose some more than others, but sadly all the MBA only have PCI 2.0 you will achieve solid perforce but it will not be the same as the claimed speed by the drive maker.
MacBook Air 13" Early 2017 SSD Upgrade to NVMe 03-09-2019

you certainly can, you will need to format it and buy an adapter, internal adapters are harder to find, but an external one would be the easiest.
Ensure NVMe Compatibility with MacBook Air SSD Replacement 03-09-2019

thanks for the feedback!
Ensure NVMe Compatibility with MacBook Air SSD Replacement 03-09-2019

Yes it should work fine

Sayfa 1 / 2

İtibar Dağılımı

Etkinlik	Sayı	Delta
Birisi kılavuzunuzu tamamladı	38	981
Yönetici kılavuzunu onayladı	5	444
Gönderi olumlu oylandı	36	432
Cevap kabul edildi	10	300
Bir kılavuz tercüme ettiniz	2	174
Birisi kılavuzunu beğendi	7	64
Kılavuzunuza bir bağlantı içeren olumlu oylanmış gönderi	6	57
Denetlenen düzenleme kılavuz adımına kabul edildi	45	45
Sınıflandırma kabul edildi	13	13
Denetlenen düzenleme vikiye kabul edildi	6	6
Birisi kılavuz çevirinizi beğendi	2	5
Denetlenen düzenleme kılavuza kabul edildi	5	5
Denetlenen düzenleme kılavuz girişine kabul edildi	5	5