If the toner isn't fusing to the paper and everything else is acceptable (alignment, toner density, etc), It's definitely a fuser. Before you consider it a write off, I'd: (1) Use a continuity meter to check that your fuser is receiving current (1.1) There should be a contact that touches the fuser, make sure it is (1.2) Use 91-99% Isopropyl alcohol to clean away any lubricant around the contacts and reapply a small amount of conductive lubricant (2) Make sure the fuser itself isn't coated with TAB (Toner additive build-up), preventing the heat from reaching the paper (3) Check for fuser wrap- I've actually seen paper get rolled around the fuser and appear to be faulty (4) Check on eBay for P2015 parts, there are new kits for sale (~$20). Let me know if any of these don't work and I'll ask one of my tech support guys. RemanMan