I’m Adriana–a working student in the iFixit Europe content team since late 2019. Around here, I’m mostly taking devices apart and writing guides for you and everyone who wants to enjoy the repair revolution.
I graduated in 2020 from HdM Stuttgart with a bachelor’s degree in Mediapublishing. Currently I’m doing my master in Crossmedia Publishing & Management.
In my spare time, I love to go hiking, playing table tennis, doing DIY-Projects and riding my bike.
Üzerinde Çalıştığım Teardown'lar
Katkıda bulunduğum Kılavuzlar
Sayfa 1 / 3
"Can the Backbone One be modded for an iPad mini?" için yanıtHi @clatekeen, after removing the spiral springs and the screws which connect both controller sides, the Backbone One can be extended by a maximum of 19cm. (7,5 inches).
"I inserted the opening tool into bottom mic, did I damage anything?" için yanıtHi Ayush, don’t worry, your Nord is fine. The way the smartphone is built, you can't damage anything with the opening tool. Inside the phone the microphone is oriented upwards at a 90° angle so you can’t reach anything with the sim opening tool. Here is an interesting article about the topic for you, check it out: Why You Can’t Really Damage Your Microphone Port with a SIM Eject Tool.
"What is the ribbon cable pin count?" için yanıtHi Jacob, I disassembled the Kishi again and counted. There are 14 pins and the pitch is 0.5 mm. Here is closeup for you.
"How thick is the back plastic for this phone?" için yanıtHi Kadem, I just measured the back cover. It is about 1 mm thick. The battery is placed behind the logo as you can see here.