Katkıda bulunduğum Kılavuzlar
Volume turning down, but not up after replacing the back coverI replaced the back cover and when I turned it back on it all worked fine and dandy except the volume switch Using the...
Vibrator not working after replacing back coverI replaced my back cover, it was broken. When I switched it all back on everything works fine and dandy apart from the...
"Blue Yeti Microphone recognised as USB Advanced Audio Device" için yanıtI had to get mine replaced by the company. It’s a known issue. They said if you leave it plugged in all the time it can be hit by a power surge which renders it’s undetectable. It’s annoying and despite it being a known issue I’ve been back and forth with the company for about a month now. Good luck!
"iPhone does not vibrate with rocker switch" için yanıtYou rule! Worked wonders for me. Thanks
"Vibrator Switch Removal and Install" için yanıtYeah I used the tip of a hot soldering iron to smudge them all down. I'm not sure how well I did it or if I was meant to, but it works. Would reccomend super gluing it in first instead of using the double sided tape. The little green (or red) switch has quite a bit of leverage and after my first attempt it pulled itself out before I squished it in hard and smushed the little plastic rivet things.