Had to push down to get the Y000 in place
I used the tip of the super pointy tweezers, and it worked well.
One cable seems to stay attached to the speaker. Don’t try to pry it off the speaker! This is shown in the video but not in these photos.
Thanks, Josh Martin! Mine was stuck too, so I lifted carefully.
Had to reheat it a few times for a minute each with a hairdryer to get the seal to break after pulling and rocking the suction
Bu gerçekleştiğinde, zaman içinde kazandıkları itibarı gösteren grafiği görüntüleyebileceksiniz.
Grafiğin nasıl görüneceğine dair bir ön izleme:
Henüz itibar kazanılmadı.
Had to push down to get the Y000 in place
I used the tip of the super pointy tweezers, and it worked well.
One cable seems to stay attached to the speaker. Don’t try to pry it off the speaker! This is shown in the video but not in these photos.
Thanks, Josh Martin! Mine was stuck too, so I lifted carefully.
Had to reheat it a few times for a minute each with a hairdryer to get the seal to break after pulling and rocking the suction