Andrew S

Edit: I just realized that you have a different TV than was shown in the video, so you might have to mask off different pins on your cable. So you'll need to fool around a little bit to get the TV working. Basically what you'll need to do is put masking tape over some of the pins in one of the cables. Attached is the image from the YouTube video which shows which pins you'll need to mask off. You will either have to do this on the left or right cable, it depends on what is happening in your TV. The cables I'm referring to are the 2 flat flex cables coming out of the board in your 3rd picture. The reason this happens is a faulty T-Con board, but in this TV, the T-Con board is integrated into the panel, so you would normally need to buy a new panel/TV. However, by blocking the signals that are confusing the T-Con, you can fix the problem.

The JC V1S (or V1SE) is about $100. This will repair the True Tone and battery meter functions of iPhone screens and batteries respectively. While it restores those functions, it may or may not remove the "battery may not be genuine" message.

Go through the diagnostics section of the service manual [belge: here]. You can start at "Step 2: Power Supply". Let me know where you get to.

Edit: You can use the battery from an iPhone 6 Plus in an iPhone 6s Plus, just keep in mind that the iPhone 6 Plus battery is thicker, which may affect the seal you get batween the display and the casing. Source

I cannot find the front glass, so I would recommend replacing the whole assembly.

I would use the MacBook until the battery is dead, and then open it up and replace the battery. It is very likely that the battery is swollen, and if it is, it shouldn't be used. Using the battery until it's dead discharges it so that it's safer to remove.

I believe any 2.5" Hard Drive or SSD should work. The SSD I would recommend is the WD Blue SSD, but you could get this one for a little less(slower speed [450 vs 530 MB/s and less warranty period[3 years vs 5 years]) . If the cable connecting to the current hard drive uses the 4 pin connector, we can explore other options.

This is normal behavior and is another way for Apple to discourage people from repairing their own devices. A warning is displayed in the introduction of the iFixit guide for display replacement on this phone. If your phone is acting normally, you can safely ignore this warning. Keep in mind that Apple continues to make moves like this that hurt the repairability of their products. Replacing the screen, battery, home button (if applicable), and/or front sensor assembly (on iPhones with Face ID) will trigger a message or cause some functions not to work on many iPhones and other Apple devices. Some tools, like the JC V1S, will restore the true tone functions but may not remove the "display may not be genuine" message. Serialization of parts is one of the things trying to be fixed by "Right to Repair" laws. You can learn more about Right to Repair under the Advocacy section on the footer of the iFixit website.

The following process will let me see your computer's specifications: Win+R>type msinfo32>Select "OK" I need the following (information I need is bolded, the other stuff is the surrounding text in the dialogue box): (1) Processor speed, which you will find in the processor section(e.g. Intel Pentium M CPU @ 1.7GHz) (2) The amount of RAM in the machine, which you will find in the Installed Physical Memory(RAM) section(e.g. 1.0 GB) (3) The Hard Drive size, which you will find in Components>Storage>Drives, under the C: Drive entry (e.g. 64.05 GB) Please type all of the required information in a comment Also keep in mind that to activate your copy of Windows 10 (to be able to personalize the OS and remove watermarks), you would need to pay $135.

The LCD/Digitizer from the iPod Touch 6th Generation should work in this iPod. You can also use the guide from the 6th Generation iPod Touch to replace your screen.

Replacement screens are now available from iFixit here.

Does the old switch have any writing on it?

Yep, mine lasted a little less than 2 years. The key to getting the two casing halves apart is to use a really small flathead screwdriver and put it in one of the holes in the casing, then start pushing downwards.