jmcdonald

I nicked this cable today working on a 6 Plus and need a new one. I’m only able to find it online overseas. Does anyone...

When I turn on the television the screen comes on just fine for a few seconds then the picture goes blank. The TV stays on...

I hate to say it but I think all of the bumps, thumps, and swims has finally caught up with it.

There is a known issue in iOS 10.2 that is causing horrible issues with the battery. May have to wait for Apple to release the next update to see if that resolves the issue.

This is a common problem, had the exact issue with my nexus 5. What I found worked was tapping the home button against the table and over time whatever was causing it to stick went away and hasn't had issues with the power button ever since.

Try adjusting your laptop lid, opening and closing it. If the screen fixes itself you have either a loose LCD cable or the cable is going bad.

Try contacting Apple again, there could be a small chance you just got a dud.

First things first, BACKUP YOUR DATA. Don't want to chance losing everything. At this point it's a 50/50 shot if the water damage has caused permanent damage or not. If everything is working now you may have dodged a MAJOR bullet, but better backup just to be safe.

It may be an issue with your carrier or carrier settings. Try contacting your carrier and see if they can resolve the issue.

Try checking the screen settings on your television. On my LG I can set different lighting settings for different inputs, and some cause the screen to appear darker than others. Each input on your television will have different pictureh modes so setting it on one input will not automatically transfer it over to another.

If both devices are showing the same issue it does sound like the charging cable. Try a different charging cable and that should resolve the issue.

You can check local repair shops in your area to see if anyone does house calls, but most of the time, depending of the model and age of the printer, it is much cheaper just to buy a new one than it is to replace the printhead.