iTronics Repair

Hello, I'm just wondering if the a backplate from a 16gb iphone 4s will fit onto the 64gb iphone 4s? Apart from the memory ca...

Hello, I have an iPhone 4S that got briefly dropped in a sink (so got wet). It worked right after, but had some issues with t...

My LCD got cracked on my 2007 Macbook Pro 15" laptop, so I replaced the LCD screen with a new one. Everything seemed to be lo...

Hi. I just replaced the battery on an iPod Touch 1st generation that was working fine before, but now, after it's put all bac...

So my iPod Touch 2nd gen keeps asking to "slide to power off" randomly when I hit the top on/off button. I've disassembled th...

To take off the glass, do we do it similarly to the 4th gen nano, where you just push it towards the clickwheel a bit to loos...

Do I need a hair dryer or some source of heat to do this? I have it mostly apart (trying to replace the digitizer and maybe L...

What is the model number for the hard drive on a 60gb iPod Video 5th gen? Thanks!

Are the batteries the same? Or maybe just the same between the 2nd gen and the 8gb 3rd gen? Thanks

I've tried starting from the side by the volume buttons, and tried starting near the bottom, but haven't found a really good ...

You need to buy a new glass/LCD screen. Then follow the instructions to open and take apart the iPod here: iPod Touch 4th Generation Teardown If you have specific questions along the way, let me know!

First, I would suggest restoring the software using iTunes. Just plug in your iPod to your computer, open iTunes, and restore the system (make sure your music is all backed up in iTunes first). If, after restoring, it is still showing lines, then probably you need a new LCD screen. They're not currently available on iFixit, but you should be able to buy one on eBay, or send it in for professional repair. Let me know if you still can't get it!

Have you tried plugging it in to a mac? If you do, open Disk Utility (Applications > Utilities > Disk Utility) and see if it shows up there at all. If it does, try to reformat the drive, and then open it up in iTunes and restore it. If it isn't responding to the computer at all, and holding down the main button doesn't do anything but reset it to being frozen on the apple logo, I'm guessing you've still got a hardware issue (probably not just that screw.) Take it apart again, and make sure everything is connected correctly and securely and locked in.. but if it still doesn't work, you might just be looking at needing a new logic board (perhaps something was broken or something that you can't even notice in the logic board). Good luck!

Unfortunately, this is most likely a logic board issue. If the sound is messed up both out of the dock AND out of the headphones, i've found in the past that this indicates a faulty logic board.

If you are unsure how to reassemble the ribbon, just take a look at iFixit.com's guide on the iPod Touch: iPod Touch 3rd Generation Repair

If you do not see the little (i believe black) tab that should flip down to hold the hard drive connector in place, there is a good chance it has been broken off the motherboard. You can either try to just stick in the hard drive connector and hold it on with tape (probably not a good long term solution) or you'll probably need to get a new motherboard.

Which generation of iPod Touch do you have? iFixit has detailed guides to help you reassemble your iPod: iPod Touch Repair

search google for "program download to move songs from iPod to computer for mac" (or PC if you have one).

Here's the possible problems (in order of probability): 1) Make sure the connections are secure (perhaps try disconnecting and reconnecting) 2) It is REALLY easy to even minorly ripped the cable, or even bent it, it won't work. 3) The replacement might be faulty. 4) You might have the wrong generation/style of digitizer.

If you pulled the small plastic piece off the motherboard, you may need to replace the motherboard unless you are able to carefully just set the connector piece back in place and get the battery to lock into place. I would suggest fiddling around with the connection (carefully) and see if you can then get it to charge.

To take off the glass, do we do it similarly to the 4th gen nano, where you just push it towards the clickwheel a bit to loosen the top first? or is a different method better here?

wow, that is small for these. the machinery gets bigger, the screws get smaller.

looks sorta similar to taking apart an iPod touch, just a lot bigger.. that about right, or are the clips somehow fundamentally different than the Touch's?

mikeseptak kullanıcısından alıntı:

If you bought a new front panel there is a rubber seal around it so dont worry about ripping it up to open your iPod

sometimes if you buy a new front it doesn't come with the front bezel, so make sure it does before you rip the old one up. otherwise you can get a new front bezel from ebay.

Careful not to use a (metal) spudger too hard, or it's really easy to bust the LCD screen with the pressure.

This is often a good fix if the iPod is giving you a sad face-- it might not be the hard drive, just the hard drive connector!

Remember to fold the backplate up the correct direction, otherwise you might break this cable.

I would suggest prying with a tool on one of the lips that holds the front place on, but do NOT pry on one near the LCD screen or you may damage the screen. Also, don't forget there is an extra small latch on the top of the LCD that has to be loosened too.

If your headphone jack isn't working, note that it is possible to replace just the headphone jack here:

There are just 4 soldering points that need to be loosened, and then you can put on the new one.

Follow this picture exactly, inserting the tool in the dock port to pry off the bottom plastic piece-- if you pry on the edges you may bend or break this plastic piece.