Senior Network Engineer
Enjoy working on small electronics projects to include the Adruino, Raspberry Pi, and other small projects.
Recently, have become interested in HAM DX'ing and that has been very interesting building my own arrays.
Reputable Suppliers of PSU?Hi, can anyone recommend some reputable suppliers of power supply units for the fat PS3?
"What is plug #6 for in the iPhone?" için yanıtI agree with Joey, But if it's the type of connector I'm thinking of you probably dont want to solder the plug to it as you may risk shorting the two poles of the antenna, best bet is get a good connection and hold in place with a tooth pick or similar instrument and glue with two-part epoxy as it will harden and not move from that spot once set comepletely. If your toothpick accidently gets glued to the connection just cut off as close as possible to the epoxy glue line with exacto-knife.
"Computer shuts off after a while of usage" için yanıtBelieve it or not E-Bay or Alibaba can get you in touch with international suppliers that have reputable products. (since thats where they're made anyway nowadays) Just be sure to check their rep. But he other two users are spot on, there are apps out there available at places like download.com that will run your PC at diffferent speeds to determine if overheating of the CPU is the problem. Are you getting a Blue Screen of Death or just a power shutdown? If just a shutdown I definitly suspect the CPU, easiest fic for that in the short term is gettting some fresh thermal paste and reseating the fan and heat radiator. Or just upgrade, they are inexpensive.
"Solder not sticking on the motherboard." için yanıtQuick and dirty, take an exacto knife a lightly scrape away the coating ontop of the printed copper run further down and solder a jumper using flux and low temp.
"HTC SIM card stuck in slot without tray" için yanıtIf you have a set of very small tweezers used in medical work, Prehaps, a pair of dental picks to leverage it out.