ABOUT BATTERY not foundbefore i placed the laptop in storage temporarily, i remove the battery and saw it charged up to 98%. After 3 months the...
"frayed wire connection between laptop and screen, how to replace?" için yanıtdo you mean the wire that connects from the wireless card into the inside of the screen? if so you need to remove the screen and in the back of it you will see the wireless wires. usually they are just glued since they only serve as antennas.
"My USB only works when under pressure" için yanıtare the batteries good in the mouse? have you try another USB port or use it in another computer? is very rare that dust or hairs get under the buttons in a wireless mouse but if you could open it you can check. There is a little button under the plastic when you press the right or left buttons. So applying pressure indicates that the button under is being press but there is something underneath preventing the signal to the mouse to respond. The mouse could also beginning to go bad.
"Why can't I update my iPhone 6" için yanıtIt seems that the phone is still recognized by a PC, right? Any specific error from i tunes? What is the OS in the PC? when you plugged the phone e.g if windows 10 it will try to trabsfer e.g photos to your PC from the phone. Could be the PC is infected, run an antyi-virus. After re-install iTunes, the latest if you don’t have it. I suppose iTunes can see the phone. Have you try to do a complete restore? Also call Apple (not an apple store) they can add some more help.
"The keyboard lights up but the keys do not type or do anything." için yanıtHave u checked the device manager as suggested by martijn? it is a good idea to provide with more information. Like what happened before the problem. For example pc was working fine yesterday, this morning when i turned it on the problem shows up. Try to use an external keyboard but first If you are on windows 10 and can still get to the desktop do the following if the mouse still works. At the bottom on the left side on the taskbar left click on the window. A windows will open and on the left side close to the bottom choose the second bottom up (like a wheel)(just a highlight will show setting). On the windows that opens all the way down choose Update & Security. On the next window on the left side choose, Recovery and on the right side choose restart now. After the pc comes back choose Trouble shoot and next screen, choose advance options and then choose start-up settings and click “restart”, when windows come back choose number 4 (safe mode). If the keyboard works after that then i will say ur pc is...
"Won’t turn on" için yanıtYour laptop (maybe an HP or Dell) has a problem with the video card or cpu. Turn the laptop on and touch any other key. Determine the pattern of the blinks. For example an HP DV6 or7 blinks once and pause and again, or 2 blinks and pause. Then with the model of ur laptop go the the manufacture website and find more information about the blinks. Like an HP dv6 ca[s linking indicates and this is most of the time graphic card problem, although HP will say it is the CPU. P.S. Sometimes disassemble the entire laptop and when assemble again makes it work and if it does save your data because the problem will come back. P.S. When posting give as much information as possible e.g pc was working yesterday and now the problem or i left the pc on sleep or hibernation and the problem, etc.
"Why does my screen turn to different colors when I go to sleep." için yanıtif you have an external monitor set windows to display on both. Do the same put it to sleep and back on again. does the monitor displays the white, green and blue lines ? if so Try to disable the sleep mode and then shut it down down. turn on again and see if the problem persists without the monitor. you might have a loose LCD cable. I don’t think there is a problem with windows or a virus but it wouldn’t get hurt to run your anti-virus software.
"Why is my screen going black after boot-up? Its like my GUI is funky." için yanıthave you tried another AC? if draws a lot of power because is defective that might be the reason. can you remove the hard disk and battery, turn of the pc and after the logo press the F2 key. this gets you into what is called the “Bios”. Leave on for 10 minutes or more and see if the screens gets black. if it does turn it off and back again this time press the F12 and the F5 for diagnostics. Run a full diagnostics. If it is good then and if you can get a new hard disk and install the OS, nothing else. After you finish the installation turn it on and let on for 10 or more minutes. see what happens. As a technician i could do more trouble shooting but that requires that i have the pc with me. i am not trying to get any business from you. Here on ifixit i give free advice that might help solve the problem.
"I need a good DC jack replacement guide." için yanıtTo start (if both laptops are identical) take a look at this video: https://www.youtube.com/watch?v=bhyi4_i7.... It seems that the jack is a cable not soldered. ===================================================== if they are not identical anyway the video will give you an idea of how to get to the jack. if it is a cable it has a sticker with the model number. if it is soldered you best shot is take it to a repair store.
"How do I clone the old HD?" için yanıtSince my mackbook pro has "El Capitan" steps below but it will be the same for SIerra and HSierra. Restart the computer and after the chime press and hold down the Command and R keys until the Utility Menu appears. Select Disk Utility from the Utility Menu then press the Continue button After Disk Utility loads select the SSD (out-dented entry with the mfgr.'s ID and size) from the side list. Click on the Erase tab in the Disk Utility toolbar. A panel should drop down. In the drop down panel set the partition scheme to GUID. Set the Format type to Mac OS Extended (Journaled.) Click on the Apply button and click on the Done button when it is activated. Select the destination volume from the left side list. Select Restore from the Edit menu of Disk Utility. A panel will drop down. Select the source volume from the drop down menu in the panel. Double-check you got it right, then click on the Restore button. Destination means the SSD. Source means the internal startup drive....
"Why my screen showing black in green" için yanıtHi, it could be the cable that connects to the logic board and the LCD screen, but if the full assembly already included this cable then:" have you try to reset the PRAM and SMC"?. You can see the desktop ok in an external monitor so it is not the graphics card(controller), i have not notice that apple MacBook pro's have an inverter like PC's. in a PC if the inverter is bad then you will have those problems even with a new LCD screen. Also there could be a small chance that even if the replacement is "new" that might be defective.
Page 1 of 3
Zaman içindeki itibar
|Gönderi olumlu oylandı||4||48|
|Cevap kabul edildi||1||30|
|Gönderi olumsuz oylandı||2||-12|