Bryan Cruse

Had someone ask about the flex cable for the Volume button. Would this require the entire board to come out for repair?...

It seems like you have an issue with the OS. When it boots into the Hello Moto screen it’s going to the bootloader, but not the operating system. With Samsung’s you can restore using Odin. check this link out. https://www.thecustomdroid.com/restore-stock-firmware-on-moto-devices/

Mobile Defenders has the back glass. It will become less water resistant depending on the type of adhesive and type of way you seal up the back.

try lifting the board and not blocking the connector. If you block the connector there are pins that could be damaged.

great guide!

great guide, works for the regular 7 too