Ana içeriğe geç
Student-Contributed Wiki

Öğrenci Katkılı Viki

Eğitim programımıza katılan müthiş bir öğrenci, bu viki sayfasını hazırladı. Bu kılavuz, iFixit personeli tarafından yönetilmiyor.

Crayons will not melt

You have done everything right and crayons still will not melt.

Device is not plugged in

Before going further, check to see if device is plugged in. If so, continue below.

Device is not turned on

Check to see if device is turned in the ‘on’ position. If so, continue below.

Lightbulb is burned out

Check to see if light bulb is burned out. Click here to check light bulb and replace if necessary.

Lid will not lock

You close the lid, but it does not lock into place while crayons are melting.

White plastic arm inside control box is broken or out of place

To see if this is the cause, click here. If white plastic arm is in fine working order, continue reading below.

Clear plastic sliding lock mechanism on underside of gray portion of the device (next to the metal vent) is out of place or broken

To see if sliding lock mechanism is not functioning properly, click here.

Metal melting tray will not flip up

Check green plastic lifting arm to see if it is working properly. If working properly, continue reading.

Green plastic lifting arm is sticking

Click here to find information regarding cleaning and general maintenance for this device.

10 Yorum

Timer will not count down after 3rd use, meaning lid is also locked.

thorns12 - Yanıt

I can't get it to unlock, the yellow button will not pop up!! It won't release the mold :(

kate.weaber - Yanıt

I am having the same isuue with my kids set. I can't get the yellow button to release and pop the mold out.

Sonja Chilton -

Can't get it to unlock. Light goes out but yellow button doesn't pop up

ktawney - Yanıt

Looks like many of us are having trouble with the button not popping up and I’d love a solution. Anyone have a clue what to do?

Barbara Stockton - Yanıt

Looks like many of us are having trouble with the button not popping up. Anyone have a solution?

Barbara Stockton - Yanıt

What do u do if crayon mold is stuck on the grey tray how do u remove it

The Raging Wolf21 - Yanıt

My yellow button won't pop up either grrr

Maranda L gardner - Yanıt

My button, yellow, won’t release either. Many same problem but no answer to fix it.

mary - Yanıt

Yup, me too. Yellow button stuck.

Helen Bird - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 5

Son 30 Gün: 109

Her zaman: 4,577