DeWalt Jobsite DCR010 Does Not Output Sound

Will our DeWalt Jobsite DCR010 speaker not output sound when the device is on and audio is played over the device? Use this troubleshooting guide to help diagnose why.

This is a troubleshooting guide providing instructions on possible reasons your DeWalt Jobsite DCR010 is not outputting sound.

If you are experiencing distorted audio over aux, see the DCR010 Aux Troubleshoot Guide wiki instead.

If connecting to the speaker over Bluetooth, ensure that the devices are paired together. If your devices are not paired, then you must put your speaker into pairing mode.

• Hold the Bluetooth button on the front of the device until the blue light starts to blink.
• Using your sound source, connect to the DCR010 through the Bluetooth settings.

If the speaker is still having Bluetooth problems refer to the [[DeWalt Jobsite DCR010

Will Not Connect to Bluetooth|DCR010 Bluetooth Troubleshoot Guide]].

The speaker on-device volume controls may be set to mute or the audio output is not set correctly.

• Ensure that your audio source is not muted and is connected to the speaker.
• Ensure that your audio source has the correct output device selected.

If you are experiencing no audio output over aux, please refer to the DCR010 Aux Troubleshoot Guide.