I'm running into an issue with iPhone 6s screen which I accidentally broke its home button flex while i was repairing (refurbish) the screen, the screen is working fine and 3D touch is working but home button is not and have test my home button on other screens and it's working so the issue is actually with the home button cable on the screen , I know it's can be replaced with changing the backlight, I only want to replace the first layer from the backlight, the problem is I need to order one and wait for at least 3 weeks, I'm going to tear it down and try to take one from other screen, has anyone done it?

Thanks in advance

⟐ Commented Mayıs 13, 2018 at 13:37 GMT-7

Now the leftover issue is:

Service Provider option in settings keeps appearing and dissapearing, phone sim card detect fine, goes searching then no service.

IMEI and modem firmware displayed in settings, checked *#06* no problem there too.

Is it okay to reflow the U_WTR_RF transceiver chip because of liquid damage before? Maybe it'll fix the problem?

⟐ Answer accepted Nisan 10, 2018 at 4:41 GMT-7

⟐ Commented Nisan 09, 2018 at 7:11 GMT-7

⟐ Answer accepted Mart 27, 2018 at 19:26 GMT-7

⟐ Edited by author Mart 16, 2018 at 19:41 GMT-7

Unfortunately CAM_EXT_LDO_EN seems to be missing too, although the pin is shiny and undamaged.

Does CAM_EXT_LDO_EN show up only when camera cable is connected or should I just say goodbye to the main camera ?

⟐ Answer accepted Mart 14, 2018 at 11:54 GMT-7

It stuck on using and turned off. After trying to turn it on, apple logo appears and then just black screen with backlight on.

When I’m trying to go into recovery mode, it shows just black screen with backlight on.

I tried going into DFU and it success. iTunes sees it and starting to restore, on iPhone appears Apple logo with progress bar, but it won’t start filling and iTunes gets an error 6.

Tried with 2 laptops and 1 pc and 3 usb cables but get the same error.

Tried with 3utools and it starts recovering in DFU, but than it shows an error like “A problem when going from DFU into Recovery mode”.

So I’m guessing that it lost Recovery mode somehow or there is a problem with some components on the motherboard.

Anyone had similar problem?

EDIT: The new information that may be useful is that I tried with another fully charged battery from another working phone and got the same error when restoring, but when I put back that second battery in the working phone, it shows like it’s empty at first, then put it to the charger and the working phone turned on and showed full battery like it was.

⟐ Answer accepted Şubat 26, 2018 at 4:42 GMT-7

⟐ Commented Şubat 20, 2018 at 19:04 GMT-7

I have removed the EMI shield for a better view of the circuit board.

⟐ Commented Şubat 17, 2018 at 8:33 GMT-7

This is the problem when you touch the flex or flip it.

⟐ Comment deleted Mayıs 17, 2019 at 8:16 GMT-7

⟐ Answer accepted Ocak 29, 2018 at 21:07 GMT-7

⟐ Answer accepted Ocak 24, 2018 at 6:19 GMT-7

⟐ Answered Ocak 19, 2018 at 12:16 GMT-7

I saw 2 types of lcd in site, what’s the different between them ?

One of them costs about 100$ and another 60$

⟐ Commented Ocak 18, 2018 at 7:55 GMT-7

How can i put theses to good use?

an adapter..or setup mini raspberry to control and power up my cameras.

There''s got to be a way

I have most cables except the logic boards. It just seems like a waist.

⟐ Commented Ocak 12, 2018 at 19:53 GMT-7

One day I woke up and I am seeing a strange black line o the screen of my iPhone. The screen is responsive though. It seems to be growing in size horizontally. I wanted to know if anyone had this problem before or can recognize this. Hopefully I dont have to change the screen of my phone for any reason.

Thanks and have a wonderful day ahead.

Ranjit

⟐ Commented Ocak 07, 2018 at 9:09 GMT-7

i recently bought an iphone 6s 16gb from ebay and the description said that it has power problems (not powering up at all). The phone doesn't have an iCloud lock and it is not blacklisted, so i grab the opportunity to try repairing it.

I received the phone and i tried to turn it on, but it is not responding. I plugged it into the wall charger, but nothing happens, although i leave it there for over an hour.

I plugged it to my Mac but nothing happens again and iTunes doesn't recognize it.

I also plugged to a windows pc, but nothing happens again.

I tried to hard reset it, but no respond again.

I also tried to put it in DFU mode, but nothing happened.

'The only sign is that it gets hot when i plugged it to the wall charger.

Do you have any idea, what the problem is?

Is there any way to find out if my logic board is damaged?

Is there any possibility that a battery replacement will short out the problem?

Thanks in advance.

⟐ Answer accepted Aralık 26, 2017 at 7:40 GMT-7

I don't know what this notification mean, can anyone help me ?

⟐ Answered Aralık 12, 2017 at 14:05 GMT-7

⟐ Answer accepted Aralık 07, 2017 at 20:01 GMT-7

I have attached some pictures here

Edit: The phone is recognized by itunes and enters the recovery mode screen. I don't want to update the phone but i dont mind restoring. Weird thing to note is that whenever i reset my phone (Home Button + Lock Button) the screen does a weird glitch and turns purple then shuts off.

⟐ Commented Aralık 01, 2017 at 11:40 GMT-7