Güncel sürümün sahibi: Tobias Isakeit

Başlık:

Can you make your own 'end nipple' on a braking cable?

Metin:

Those cylinders at the end of cables break off sometimes. Is there some cheap way to replace it? I tried tying it around a little metal 'wheel'. That seems to work. But might be too big to fit in some brake levers.

* If the question is not clear, tell me. It's a hard question to translate from Dutch!

Cihaz:

Durum:

open

Kabul Edilen Cevap:

37440

Düzenleyen: Tom

Başlık:

Can you make your own 'end nipple' on a braking cable?

Metin:

Those cylinders at the end of cables break off sometimes. Is there some cheap way to replace it? I tried tying it around a little metal 'wheel'. That seems to work. But might be too big to fit in some brake levers.

* If the question is not clear, tell me. It's a hard question to translate from Dutch!

Cihaz:

Road Bike

Durum:

open

Kabul Edilen Cevap:

Düzenleyen: Tom

Başlık:

Can you make your own 'end nipple' on a braking cable?

Metin:

Those cylinders at the end of cables break off sometimes. Is there some cheap way to replace it? I tried tying it around a little metal 'wheel'. That seems to work. But might be too big to fit in some brake levers.

* If the question is not clear, tell me. It's a hard question to translate from Dutch!

Cihaz:

Road Bike

Durum:

open

Kabul Edilen Cevap:

Düzenleyen: Tom

Başlık:

Can you make your own 'end nipple' on a braking cable?

Metin:

Those cylinders at the end of cables break off sometimes. Is there some cheap way to replace it? I tried tying it around a little metal 'wheel'. That seems to work. But might be too big to fit in some brake levers.

* If the question is not clear, tell me. It's a hard question to translate from Dutch!

Cihaz:

Road Bike

Durum:

open

Kabul Edilen Cevap:

Düzenleyen: Tom

Başlık:

Metin:

Those cylinders at the end of cables break off sometimes. Is there some cheap way to replace it? I tried tying it around a little metal 'wheel'. That seems to work. But might be too big to fit in some brake levers.

* If the question is not clear, tell me. It's a hard question to translate from Dutch!

Cihaz:

Road Bike

Durum:

open

Orijinal gönderinin sahibi: Tom

Başlık:

Can you make you own 'end nipple' on a braking cable?

Metin:

Those cylinders at the end of cables break off sometimes. Is there some cheap way to replace it? I tried tying it around a little metal 'wheel'. That seems to work. But might be too big to fit in some brake levers.

* If the question is not clear, tell me. It's a hard question to translate from Dutch!

Cihaz:

Road Bike

Durum:

open