This usually means the memory card has failed to the extent it can no longer read, but permanently locks into read-only mode. This is HOW you want your card to fail; performance will probably take a hit but you can still pull your files off.
+
This usually means the memory card has failed to the extent it can no longer read, but permanently locks into read-only mode. This is HOW you want your card to fail; performance will probably take a hit but you can still pull your files off. It's a protection measure built into flash memory.
Pull your files off of the card and try formatting it in your camera. If it works, use the card until you can replace it but don’t keep using it. If you do, there’s a descent chance the card will die for good and it may not die gracefully to the extent your data is safe. Cards are cheap; data recovery isn’t.
This usually means the memory card has failed to the extent it can no longer read, but permanently locks into read-only mode. This is HOW you want your card to fail; performance will probably take a hit but you can still pull your files off.
-
Pull your files off of the card and try formatting it in your camera. If it works, use the card until you can replace it but don’t keep using it too long or it may do this again. Cards are cheap and data recovery when it permanently dies isn’t.
+
Pull your files off of the card and try formatting it in your camera. If it works, use the card until you can replace it but don’t keep using it. If you do, there’s a descent chance the card will die for good and it may not die gracefully to the extent your data is safe. Cards are cheap; data recovery isn’t.
This usually means the memory card has failed to the extent it can no longer read, but permanently locks into read-only mode. This is HOW you want your card to fail; performance will take a hit but you can still pull your files off.
+
This usually means the memory card has failed to the extent it can no longer read, but permanently locks into read-only mode. This is HOW you want your card to fail; performance will probably take a hit but you can still pull your files off.
Pull your files off of the card and try formatting it in your camera. If it works, use the card until you can replace it but don’t keep using it too long or it may do this again. Cards are cheap and data recovery when it permanently dies isn’t.
This usually means the memory card has failed to the extent it can no longer read, but permanently locks into read-only mode. This is HOW you want your card to fail; performance will take a hit but you can still pull your files off.
Pull your files off of the card and try formatting it in your camera. If it works, use the card until you can replace it but don’t keep using it too long or it may do this again. Cards are cheap and data recovery when it permanently dies isn’t.