# Heat the back cover with a heat gun, blow dryer, etc. to loosen the adhesive
# Use something small and thin to get between the glass and the phone’s housing and separate the glass from the phone
# The new back should come with some adhesive, otherwise apply a small bead of glue all along the outer edge of the glass back
# Place the glass back onto the phone’s housing and press along the outer edges to create a seal between the glue and the housing
-
A back can be purchased [https://www.mobilesentrix.ca/back-cover-for-samsung-galaxy-a8-a530-2018-black|here]
Hope this helps!
+
+
+
+
Update: The fingerprint sensor/camera lens may have to be transferred from the smashed back to the new one. Simply use a little bit of heat to loosen it from the old back and glue it down on the new one.
Its a pretty easy procedure:
# Heat the back cover with a heat gun, blow dryer, etc. to loosen the adhesive
# Use something small and thin to get between the glass and the phone’s housing and separate the glass from the phone
# The new back should come with some adhesive, otherwise apply a small bead of glue all along the outer edge of the glass back
# Place the glass back onto the phone’s housing and press along the outer edges to create a seal between the glue and the housing
A back can be purchased [https://www.mobilesentrix.ca/back-cover-for-samsung-galaxy-a8-a530-2018-black|here]
Hope this helps!