Güncel sürümün sahibi: mike
Metin:
| - | Did you get an error code? Tried a different cable? You are using a cable, right? |
|---|---|
| + | Did you get an error code? Tried a different cable? You are using a cable, right? Some have found that logging off and then on again helps. |
| ''From my own experience it is ***VERY*** important to read several times and follow directions exactly.'' | |
| [br] | |
| [link|https://www.dji.com/nz/air-2s/downloads|DJI Manual and Software for updating|new_window=true] | |
| [br] | |
| ***Here are the instructions from the DJI Air 2S User Manual Firmware Update*** | |
| Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware. | |
| * ***Using DJI Fly*** | |
| When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your mobile device to the internet and follow the on-screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft. Internet is required. | |
| * ***Using DJI Assistant 2 (Consumer Drones Series)*** | |
| ''Update the aircraft and remote controller firmware ***separately*** using DJI Assistant 2 (Consumer Drones Series). Use this method with Ethernet and USB cable.'' | |
| - | |
| - | |
| ***Follow the instructions below to update the ''aircraft firmware'' through DJI Assistant 2 (Consumer Drones Series):*** | |
| # Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. | |
| # Power on the aircraft and ***connect the aircraft to a computer*** via the USB-C port. | |
| # Select DJI Air 2S and click on Firmware Updates on the left panel. | |
| # Select the firmware version that you wish to update to. | |
| # Wait for the firmware to download. The firmware update will start automatically. | |
| # Wait for the firmware update to be completed. | |
| ***Follow the instructions below to update the ''remote controller firmware'' through DJI Assistant 2 (Consumer Drones Series):*** | |
| # Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. | |
| # Power on the remote controller and connect to a computer via the USB-C port using a Micro USB cable. | |
| # Select DJI Air 2S Remote Controller and click on Firmware Updates on the left panel. | |
| # Select the firmware version that you wish to update to. | |
| # Wait for the firmware to download. The firmware update will start automatically. | |
| # Wait for the firmware update to be complete | |
| ***Note:*** | |
| * Make sure to follow ***all*** the steps to update firmware. ***''Otherwise, the update may fail.''*** | |
| * The firmware update will take approximately 10 minutes. It is normal that the gimbal goes limp, | |
| * aircraft status indicators blink, and the aircraft reboots. Wait patiently until the update is complete. | |
| * Make sure the computer has access to the internet. | |
| * Before performing an update, make sure the Intelligent Flight Battery is at least 40% charged and the | |
| * remote controller is at least 30% charged. | |
| * Do not disconnect the aircraft from the computer during an update. | |
| ''DJI Air 2S User Manual© 2022 DJI All Rights Reserved.'' |
Durum:
open
Düzenleyen: mike
Metin:
| Did you get an error code? Tried a different cable? You are using a cable, right? | |
| ''From my own experience it is ***VERY*** important to read several times and follow directions exactly.'' | |
| [br] | |
| [link|https://www.dji.com/nz/air-2s/downloads|DJI Manual and Software for updating|new_window=true] | |
| [br] | |
| ***Here are the instructions from the DJI Air 2S User Manual Firmware Update*** | |
| Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware. | |
| * ***Using DJI Fly*** | |
| When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your mobile device to the internet and follow the on-screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft. Internet is required. | |
| - | ''Use this method with Ethernet and USB cable.'' |
| + | * ***Using DJI Assistant 2 (Consumer Drones Series)*** |
| + | ''Update the aircraft and remote controller firmware ***separately*** using DJI Assistant 2 (Consumer Drones Series). Use this method with Ethernet and USB cable.'' |
| - | * ***Using DJI Assistant 2 (Consumer Drones Series)*** |
| - | ''Update the aircraft and remote controller firmware ***separately*** using DJI Assistant 2 (Consumer Drones'' |
| - | ''Series).'' |
| - | * ***Follow the instructions below to update the ''aircraft firmware'' through DJI Assistant 2 (Consumer Drones Series):*** |
| - | * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. |
| - | * Power on the aircraft and ***connect the aircraft to a computer*** via the USB-C port. |
| - | * Select DJI Air 2S and click on Firmware Updates on the left panel. |
| - | * Select the firmware version that you wish to update to. |
| - | * Wait for the firmware to download. The firmware update will start automatically. |
| - | * Wait for the firmware update to be completed. |
| - | * ***Follow the instructions below to update the ''remote controller firmware'' through DJI Assistant 2 (Consumer Drones Series):*** |
| - | * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. |
| - | * Power on the remote controller and connect to a computer via the USB-C port using a Micro USB cable. |
| - | * Select DJI Air 2S Remote Controller and click on Firmware Updates on the left panel. |
| - | * Select the firmware version that you wish to update to. |
| - | * Wait for the firmware to download. The firmware update will start automatically. |
| - | * Wait for the firmware update to be complete |
| + | ***Follow the instructions below to update the ''aircraft firmware'' through DJI Assistant 2 (Consumer Drones Series):*** |
| + | |
| + | # Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. |
| + | # Power on the aircraft and ***connect the aircraft to a computer*** via the USB-C port. |
| + | # Select DJI Air 2S and click on Firmware Updates on the left panel. |
| + | # Select the firmware version that you wish to update to. |
| + | # Wait for the firmware to download. The firmware update will start automatically. |
| + | # Wait for the firmware update to be completed. |
| + | ***Follow the instructions below to update the ''remote controller firmware'' through DJI Assistant 2 (Consumer Drones Series):*** |
| + | |
| + | # Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. |
| + | # Power on the remote controller and connect to a computer via the USB-C port using a Micro USB cable. |
| + | # Select DJI Air 2S Remote Controller and click on Firmware Updates on the left panel. |
| + | # Select the firmware version that you wish to update to. |
| + | # Wait for the firmware to download. The firmware update will start automatically. |
| + | # Wait for the firmware update to be complete |
| ***Note:*** | |
| * Make sure to follow ***all*** the steps to update firmware. ***''Otherwise, the update may fail.''*** | |
| * The firmware update will take approximately 10 minutes. It is normal that the gimbal goes limp, | |
| * aircraft status indicators blink, and the aircraft reboots. Wait patiently until the update is complete. | |
| * Make sure the computer has access to the internet. | |
| * Before performing an update, make sure the Intelligent Flight Battery is at least 40% charged and the | |
| * remote controller is at least 30% charged. | |
| * Do not disconnect the aircraft from the computer during an update. | |
| ''DJI Air 2S User Manual© 2022 DJI All Rights Reserved.'' |
Durum:
open
Düzenleyen: mike
Metin:
| - | ''From my own experience it is ***VERY*** important to read several times and follow directions exactly.'' |
|---|---|
| + | Did you get an error code? Tried a different cable? You are using a cable, right? |
| + | |
| + | ''From my own experience it is ***VERY*** important to read several times and follow directions exactly.'' |
| [br] | |
| [link|https://www.dji.com/nz/air-2s/downloads|DJI Manual and Software for updating|new_window=true] | |
| [br] | |
| - | ***Here are the instructions from the DJI Air 2S User Manual*** |
| - | |
| - | ***Firmware Update*** |
| + | ***Here are the instructions from the DJI Air 2S User Manual Firmware Update*** |
| Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware. | |
| * ***Using DJI Fly*** | |
| - | When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware |
| + | When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your mobile device to the internet and follow the on-screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft. Internet is required. |
| - | update is available. To start updating, connect your mobile device to the internet and follow the on- |
| - | |
| - | screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the |
| - | |
| - | aircraft. Internet is required. |
| + | ''Use this method with Ethernet and USB cable.'' |
| * ***Using DJI Assistant 2 (Consumer Drones Series)*** | |
| ''Update the aircraft and remote controller firmware ***separately*** using DJI Assistant 2 (Consumer Drones'' | |
| ''Series).'' | |
| * ***Follow the instructions below to update the ''aircraft firmware'' through DJI Assistant 2 (Consumer Drones Series):*** | |
| * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. | |
| * Power on the aircraft and ***connect the aircraft to a computer*** via the USB-C port. | |
| * Select DJI Air 2S and click on Firmware Updates on the left panel. | |
| * Select the firmware version that you wish to update to. | |
| * Wait for the firmware to download. The firmware update will start automatically. | |
| * Wait for the firmware update to be completed. | |
| * ***Follow the instructions below to update the ''remote controller firmware'' through DJI Assistant 2 (Consumer Drones Series):*** | |
| * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. | |
| * Power on the remote controller and connect to a computer via the USB-C port using a Micro USB cable. | |
| * Select DJI Air 2S Remote Controller and click on Firmware Updates on the left panel. | |
| * Select the firmware version that you wish to update to. | |
| * Wait for the firmware to download. The firmware update will start automatically. | |
| * Wait for the firmware update to be complete | |
| ***Note:*** | |
| * Make sure to follow ***all*** the steps to update firmware. ***''Otherwise, the update may fail.''*** | |
| * The firmware update will take approximately 10 minutes. It is normal that the gimbal goes limp, | |
| * aircraft status indicators blink, and the aircraft reboots. Wait patiently until the update is complete. | |
| * Make sure the computer has access to the internet. | |
| * Before performing an update, make sure the Intelligent Flight Battery is at least 40% charged and the | |
| * remote controller is at least 30% charged. | |
| * Do not disconnect the aircraft from the computer during an update. | |
| ''DJI Air 2S User Manual© 2022 DJI All Rights Reserved.'' |
Durum:
open
Düzenleyen: mike
Metin:
| - | ''From my own experience it is ***VERY*** important to read several times and follow directions exactly.'' [br] |
|---|---|
| + | ''From my own experience it is ***VERY*** important to read several times and follow directions exactly.'' |
| + | |
| + | [br] |
| + | [link|https://www.dji.com/nz/air-2s/downloads|DJI Manual and Software for updating|new_window=true] |
| + | |
| [br] | |
| ***Here are the instructions from the DJI Air 2S User Manual*** | |
| ***Firmware Update*** | |
| Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware. | |
| * ***Using DJI Fly*** | |
| - | |
| When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware | |
| update is available. To start updating, connect your mobile device to the internet and follow the on- | |
| screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the | |
| aircraft. Internet is required. | |
| * ***Using DJI Assistant 2 (Consumer Drones Series)*** | |
| - | |
| ''Update the aircraft and remote controller firmware ***separately*** using DJI Assistant 2 (Consumer Drones'' | |
| ''Series).'' | |
| * ***Follow the instructions below to update the ''aircraft firmware'' through DJI Assistant 2 (Consumer Drones Series):*** | |
| * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. | |
| * Power on the aircraft and ***connect the aircraft to a computer*** via the USB-C port. | |
| * Select DJI Air 2S and click on Firmware Updates on the left panel. | |
| * Select the firmware version that you wish to update to. | |
| * Wait for the firmware to download. The firmware update will start automatically. | |
| * Wait for the firmware update to be completed. | |
| - | |
| * ***Follow the instructions below to update the ''remote controller firmware'' through DJI Assistant 2 (Consumer Drones Series):*** | |
| * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. | |
| * Power on the remote controller and connect to a computer via the USB-C port using a Micro USB cable. | |
| * Select DJI Air 2S Remote Controller and click on Firmware Updates on the left panel. | |
| * Select the firmware version that you wish to update to. | |
| * Wait for the firmware to download. The firmware update will start automatically. | |
| * Wait for the firmware update to be complete | |
| - | |
| ***Note:*** | |
| * Make sure to follow ***all*** the steps to update firmware. ***''Otherwise, the update may fail.''*** | |
| * The firmware update will take approximately 10 minutes. It is normal that the gimbal goes limp, | |
| * aircraft status indicators blink, and the aircraft reboots. Wait patiently until the update is complete. | |
| * Make sure the computer has access to the internet. | |
| * Before performing an update, make sure the Intelligent Flight Battery is at least 40% charged and the | |
| * remote controller is at least 30% charged. | |
| * Do not disconnect the aircraft from the computer during an update. | |
| - | |
| ''DJI Air 2S User Manual© 2022 DJI All Rights Reserved.'' |
Durum:
open
Orijinal gönderinin sahibi: mike
Metin:
''From my own experience it is ***VERY*** important to read several times and follow directions exactly.'' [br] [br] ***Here are the instructions from the DJI Air 2S User Manual*** ***Firmware Update*** Use DJI Fly or DJI Assistant 2 (Consumer Drones Series) to update the aircraft firmware. * ***Using DJI Fly*** When you connect the aircraft or remote controller to DJI Fly, you will be notified if a new firmware update is available. To start updating, connect your mobile device to the internet and follow the on- screen instructions. Note that you cannot update the firmware if the remote controller is not linked to the aircraft. Internet is required. * ***Using DJI Assistant 2 (Consumer Drones Series)*** ''Update the aircraft and remote controller firmware ***separately*** using DJI Assistant 2 (Consumer Drones'' ''Series).'' * ***Follow the instructions below to update the ''aircraft firmware'' through DJI Assistant 2 (Consumer Drones Series):*** * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. * Power on the aircraft and ***connect the aircraft to a computer*** via the USB-C port. * Select DJI Air 2S and click on Firmware Updates on the left panel. * Select the firmware version that you wish to update to. * Wait for the firmware to download. The firmware update will start automatically. * Wait for the firmware update to be completed. * ***Follow the instructions below to update the ''remote controller firmware'' through DJI Assistant 2 (Consumer Drones Series):*** * Launch DJI Assistant 2 (Consumer Drones Series) and log in with your DJI account. * Power on the remote controller and connect to a computer via the USB-C port using a Micro USB cable. * Select DJI Air 2S Remote Controller and click on Firmware Updates on the left panel. * Select the firmware version that you wish to update to. * Wait for the firmware to download. The firmware update will start automatically. * Wait for the firmware update to be complete ***Note:*** * Make sure to follow ***all*** the steps to update firmware. ***''Otherwise, the update may fail.''*** * The firmware update will take approximately 10 minutes. It is normal that the gimbal goes limp, * aircraft status indicators blink, and the aircraft reboots. Wait patiently until the update is complete. * Make sure the computer has access to the internet. * Before performing an update, make sure the Intelligent Flight Battery is at least 40% charged and the * remote controller is at least 30% charged. * Do not disconnect the aircraft from the computer during an update. ''DJI Air 2S User Manual© 2022 DJI All Rights Reserved.''
Durum:
open