prefurbished RROD xbox from ebay

Question

Xbox 360

429 Soru Tümünü görüntüle

Sam Legierski @samlegierski

İtibar: 1

1

2

Gönderildi: 20 Ağu 2012

Seçenekler

prefurbished RROD xbox from ebay

So the other day i bought a what a thought was a broken xbox 360 from ebay for a really low price, when i got it i cracked it open with the kit i got from ifixit.com and what i discovered was that the original user or someone before him had previously refurbished it, replacing the xclamps the thermal paste and pretty much everything. I continued to re replace everything in it, this was my first time doing it but i had no problems at all. When i put it back together to turn it on i still got the same flashing ring. assuming i did everything right any ideas on how to fix this mess?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan -1

Yorum Ekle

2 Cevap

oldturkey03 @oldturkey03 İtibar: 784,3b 1,1b 894 2,3b · Answer 1 · 2012-08-20T19:28:23-07:00

En Yararlı Yanıt

oldturkey03 @oldturkey03

İtibar: 784,3b

1,1b

894

2,3b

Gönderildi: 20 Ağu 2012

Seçenekler

Sam Legierski, the X-clamps work by putting additional pressure on the IC to close the microcracks (thanks to lead free solder). You may have to try to reseat everything and see if that makes a difference. The only other way would be to reflow the IC's. A permanent fix would be to reball the logic board. Of course, all that the issues are related to the bad solder.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

2 Yorum:

how do i reset everything? just go over and do it again? and how do you reflow the IC's...sorry for the noobishness thanks for all the help

Sam Legierski tarafından 21 Ağu 2012

Sam Legierski, that is what I would do. Take it all apart again, take your time and redo it. Be careful with exerting the pressure on the X-clamps, you do not want to flex the board to much. Check this guide for the reflow.

oldturkey03 tarafından 21 Ağu 2012

Yorum Ekle