Following your instructions for the removal/replacement of the HD
PowerBook G4 Aluminum 12" 1-1.5 GHz Hard Drive Replacement
at Step 13 it indicates that there are 2 hex screws. I have a Torx T6 driver but it just spins in those screws.
Any recommendations on how to get those screws out (and back in)?
Bu iyi bir soru mu?
İtibar: 2,2b
13
6
1
On the comments area beneath steps 9 to 16:
"I found that a T7 Torx screwdriver worked better for removing the two hex screws" slessard, Nov 7 2009 @ 2:33 PM
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 7
Son 30 gün: 15
Her zaman: 333
