Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

White screen after replacing LCD?

Before I closed the ipod up I turned it on to make sure everything was working and they all were. So I snap the glass on and next think you know the screen is white. Can't fix it from home + power, volume + home + power, or restore. Any advise would be great. Checked connections several times and have tried another screen

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
1 Yorum

DFU mode restore didn't work. Not sure what to look for on the logic board. I compared the area on the right of the lcd connector to that of a new ipod and they looked the same to me. The connectors aren't missing any pins

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

If you have tested with another LCD and having the same issue and all connections are proper then you might have a bad logic board. Some things you can try DFU Mode then restore. Test to make sure the LCD works. if the DFU mode restore didn't resolve and the LCD is working then your logic board is what i would look at next.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Doug sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 1,196