İtibar: 13
1
1
Im looking on working on some charge ports for many cell phones and was wondering what would be a good soldering wire to use on cell phone pcb's, Size, Ratio and lead or lead-free. Any suggestions would be appreciated. Thanks
Bu iyi bir soru mu?
İtibar: 32,1b
108
61
76
Most, if not all devices are now assembled using lead free solder as it is a requirement to be in the European market (ROHS) I would suggest using something like 1mm Lead Free Solder
Bu yanıt yardımcı oldu mu?
İtibar: 3,6b
5
1
7
I use 63/37 lead solder to repair most smd components. I use 62/36/2 to solder charge ports. I always use a good quality flux it can make a world of difference in the solder quality.
Bu yanıt yardımcı oldu mu?
Craig do you have an email? I have some questions.
Craig you mentioned using a specific solder and flux. Can you provide the product info for both. I need to repair a Samsung Tab 3 7.0 charge port that requires soldering.
Son 24 Saat: 0
Son 7 gün: 10
Son 30 gün: 36
Her zaman: 13,361
2 Yorum
What wou8l;d be a good flux and acid free or acid flux
John Tonetti tarafından
i know this post is old, but im getting into doing some deep hardware editing… like using an s8’s board and connecting it to a different external touchscreen, and inserting the hardware into a new handmade case. This was the result of my first search. thank you guys for assuring me things like this are possible
Christopher tarafından