Ana içeriğe geç

Replaced PRAM battery. Still have clock issues, not showing RAM etc.

After diagnosing a PRAM battery as the culprit to my Powerbook's clock and incorrect RAM recognition, I ordered from iFixit and followed the instructions to replace JUST the PRAM battery. Everything went smoothly and the ifixit instructions were perfect.

However, upon assembling and turning on, the clock issue persists (1904) and the machine is still only showing one stick of RAM.

Thoughts?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Seems that beyond the battery (maybe even instead of the battery) you have corrupt PRAM and or NVRAM files... OR a failing PMU See this from Cnet.

If this answer was helpful please remember to mark it accepted.''

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

butler1000 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 403