Ana içeriğe geç
Soru Kapandı

iMac G5 20" Model A1145 Dead Nothing on Start-up

iMac G5 20" Model A1145

I have no problems with it overheating or fans making a lot of noise or any of that. After a power went off for the afternoon, When it came on again my imac was dead. I suspected it to be the power supply.

Tested, lead, fuse. Reset PMU/SMU. Nothing. Took front off and the diagnostic LED number #1 only shows. When the power button pressed no flicker of LED#2.

Is this likely to be the power supply?

Or is it the logic board fried?

Your help would be most appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
1 Yorum

From research I take it there is no DC-DC board on this version. Therefore i need to replace the power supply?

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I bought a new power supply. Fitted it as per the guide below:

iMac G5 20" Model A1145 Power Supply Replacement

Hey presto all LED#1 #2 & #3 fired up instantaneously. Fans kicked in, screen came on logged in as per normal.

Brilliant :) Please do not archive this it is solved and can be useful to other people with G5 i-sight i-macs.

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

Jason please accept your answer.

tarafından

Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 745