Need Help With HP 41C Calculator Repair

Question

HP-41C

First manufactured by HP in 1979.

10 Soru Tümünü görüntüle

Reid @reid76351

İtibar: 35

1

Gönderildi: 2 Nis 2010

Seçenekler

Need Help With HP 41C Calculator Repair

Does anyone know where I might be able to get an old HP 41C Calculator repaired or where I might find information on repairing it myself. Hewlett Packard quit making these probably 20 or so years ago. I have had this one since somewhere around 1980 and it has worked until about 6 or 7 years ago. Since it quit working I have not been able to locate anyone that repairs them. Any help would be very much appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 2

Yorum Ekle

3 Cevap

Seçilen Çözüm

markus weiher @markusweiher

İtibar: 35,1b

140

71

53

Gönderildi: 2 Nis 2010

Seçenekler

did you look at www.hp41.org and www.hpmuseum.org ?

there are some informations about this device - including repair stuff

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 3

3 Yorum:

Hi markus--not much info at the first site but I think you may have gold on the second. Including the URL. +1 Ralph

http://www.hpmuseum.org/repair.htm

rj713 tarafından 2 Nis 2010

hi ralph, i found some nice stuff on the first one

there is a repair section: http://www.hp41.org/LibView.cfm?Command=... and in the library i've seen many hp internals, like service manuals and schematics.

markus weiher tarafından 2 Nis 2010

Hi, OK I see what you are talking about. What stopped me was the login requirement. I don't like to do that unless I'm going to be using the site regularly. Ralph

rj713 tarafından 3 Nis 2010

Yorum Ekle

Hi markus--not much info at the first site but I think you may have gold on the second. Including the URL. +1 Ralph

http://www.hpmuseum.org/repair.htm — rj713
hi ralph, i found some nice stuff on the first one

there is a repair section: http://www.hp41.org/LibView.cfm?Command=... and in the library i've seen many hp internals, like service manuals and schematics. — markus weiher
Hi, OK I see what you are talking about. What stopped me was the login requirement. I don't like to do that unless I'm going to be using the site regularly. Ralph — rj713