looking the micro welds they seems to be all right but they doesn't work...is it possible to weld againg them or it's necessary to change all the part of mother board where the chargar attack is attached?
Bu iyi bir soru mu?
İtibar: 782,4b
1,1b
893
2,3b
Kevin Santi, yes you can reflow the existing solder with a small soldering iron. Test your jack with a multimeter. Plug it in and test on the motherboard contacts, to make sure that you have power on that end. Hope this helps, good luck
Bu yanıt yardımcı oldu mu?
Thank you very much =D
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 426
