iMac Intel 24" Early 2008 3.06GHz
Hardware system report says "No Disc Burning device was found"
New DVD Burner fitted (part No : Panasonic UJ-875) still saying "No Disc Burning Device was found"
Any ideas?
Thanks
Regards
John Hutchinson
Bu iyi bir soru mu?
İtibar: 685,3b
3,4b
1,1b
2,6b
Use this guide and go back through and check your cable connections: iMac Intel 24" EMC 2134 and 2211 Optical Drive Replacement
Bu yanıt yardımcı oldu mu?
I have had my iMac in pieces again & checked the cable to the DVD (motherboard & DVD ends) both were seated ok.
Is there any test software available to check the interface to the DVD?
The label on the motherboard reads :
Mother board label:
W881003CVZUMA K3 MB BEST 3.06G
that's actually the serial number for the logic board not the computer. The serial number for the computer is on the bottom of the stand.
The reason I gave the motherboard label number was because I want to find some test software to test the the DVD interface on the motherboard.
The numbers on the base of my iMac are:
Serial No: W88121JH0N4
iMac 24"/3.06GHZ/2GB/500GB/SD/AP/BT
IC:4324A-BRCM1022 Model No.:A1225
Apple iMac "Core 2 Duo" 3.06 24-Inch (Early 2008) Specs
Identifiers: Early 2008 - MB398LL/A - iMac8,1 - A1225 - 2211
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 858
