replaced hard drive,black screen,wrong install disc,
hard drive works,put in wrong disc and will not eject.Screen is black and beeps about every 3 seconds.
Bu iyi bir soru mu?
Puan
1
121993
2 Cevap
Seçilen Çözüm
İtibar: 116,3b
66
68
359
You don't have your RAM in right either... that's the beeping and failure to start. Go over reassembly again. Holding down the space bar or mouse at startup should eject the disk unless it's jammed or a micro disk.
If this Answer is helpful please remember to return and mark it Accepted.
Bu yanıt yardımcı oldu mu?
Puan
2
İtibar: 685,3b
3,4b
1,1b
2,6b
After reseating your RAM, hold down the mouse button on restart to eject the disk.
Bu yanıt yardımcı oldu mu?
Puan
2
