Eşyalarını Tamir Et Topluluk Mağaza

Released June 2009 / 2.66, 2.8, or 3.06 GHz Core 2 Duo Processor

301 Soru Tümünü görüntüle

Seçenekler

sound not working after reassembling

Hi, I recently purchased some tools from you to replace my macs dc connector. Everything went ok, but I have lost the audio. Can you tell me which connector to check to make sure I plugged it in good? Thanks

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I would attempt to reset the PRAM (hold command + option + P + R while powering on until you've heard it chime twice).

If that didn't work I would reset the SMC

  • Make sure your Mac is connected to power and turned off
  • Press and hold the left Shift + Control + Option buttons while pressing the power button for 5 seconds
  • Let go of all the keys & button
  • Attempt to power on after waiting 2-3 seconds

If it still had no sound then I would check the subwoofer cable and the left speaker cable

Hopefully one of those steps fixes it for you!

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

canillas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 7

Son 30 gün: 13

Her zaman: 117