Eşyalarını Tamir Et Topluluk Mağaza

Mid 2009 Model A1278 / 2.26 or 2.53 GHz Core 2 Duo processor EMC 2326

745 Soru Tümünü görüntüle

Seçenekler

Mother Board : S.O.S.

I tried an impossible repair for a customer

MacBook Pro Mid 2009

After updating interrupted, does not start. The motherboard is SOS: 3 long beeps, 3 short and 3 long

I tried everything I believe:

Reinstalling Firmware 1.7 for this model, the CD is rejected (I burned CD 3: the same)

Replacing RAM: Nothing

Replaced the battery, disconnected the battery ...

Unable to start external hard disk or DVD with install., The keyboard is not functional.

If someone in another track, I'm interested, but obviously replace the motherboard!

Firmware Pb, pb Burning CDs or DVDs

Big thank you in advance

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
2 Yorum

What was being updated here: the firmware, OS or hardware?

tarafından

Mac Os update only

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

From what I understand the logic board may be pooched. I know of no way to DIY correct this... a logic board repair business might be able to replace/re-flash the firmware chip... but the shade tree fix (if the reload failed) would be to replace the logic board.

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

I think unfortunately you're right :(

tarafından

Firmware/EFI chip changed and it works fine, Thanks

tarafından

Yorum Ekle

Seçenekler

I don't remember seeing the OS installer do a firmware upgrade in the update process. So I'm not sure why your system bit the big one here when you were only upgrading the OS. What OS-X are you installing?

Review this Apple TN on the Beep Codes iMac (Mid 2007) and later models: About startup tones By this your Firmware is in the process of being updated. So it is likely looking for the image file on the HD or DVD you where installing the OS from. Put everything back together and as you were doing the upgrade and see if you can get the process to complete.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

2 Yorum:

Yea sometimes the firmware seems to take unusually long, and, you must let it restart (possibly more than once) on its own until it stops at the login/desktop (however you have it set up).

tarafından

Mikhrych - Can you give us details on what did it. Did you just let the process complete or did you have to physically swap out the EEPROM after loading it with the firmware.

tarafından

Yorum Ekle

Yanıtını ekle

Mikhrych sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 9

Her zaman: 744