Ana içeriğe geç

Tiger Install after drive replacement

Hi,

My girlfriends iBook G4 1.2gHz hard drive quit. I replaced it and while trying to install os 10.4.11, I get install errors. The disk utility says everything is fine. The drive that came out was a Samsung HM060HC 60 gB, 5400 rpm, 8m, PATA. The one thats going in is a Hitachi Travelstar 60gB, 7200rpm ATA/IDE. Could the drive type be the problem or is there something else?

Thanks in advance

Mike

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan -1
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Could be the drive - the industry nickname for that model is "Deathstar" because they are so problematic. The Disk Utility is a pretty lightweight tool - try a reformat (partition) before reinstall - on that age machine it could be your optical drive or even damage to the install disk.

If you have another drive you could try to install your OS on that, boot from it and clone (or apple restore) it back to the internal drive.

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Puan 1

2 Yorum:

I tried an external drive as well. Same result HOWEVER, I used the same os disk to install to another machine.

tarafından

Thanks MacHead,

It was the ram. Good advice!

Mike

tarafından

Yorum Ekle

Yanıtını ekle

msovin55 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 7

Son 30 gün: 9

Her zaman: 106