Ana içeriğe geç

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Soru Tümünü görüntüle

iPhone 4 won't boot after screen fix

Hi

I've replaced the screen on a friends iPhone 4 and it wont boot, everything is plugged in properly all screws are in their proper places, I just took it apart AGAIN, and there is a small metal bracket loose in there.. Does anybody know where this should go (its from under the metal casing over the screen, headphone/sleep wake ribbon connectors).. Link below to photo..

Cheers,

Chris

the bit at the bottom of the pic

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

That metal piece is a ground for your signal it must be reinstalled on top of emi shield before reassembly.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Chris Williams sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 85