Eşyalarını Tamir Et Topluluk Mağaza

Before merging with HP, Compaq manufactured a full range of laptop computers. Now they are manufactured by HP mostly with basic features.

296 Soru Tümünü görüntüle

Seçenekler

recycle old laptop display

Hi, I have an old Compaq laptop, which died recently. The two hinges broke so the display completely separated from the body.

The laptop was a piece of junk but the dvi display is still very nice. I am wondering how I can recycle it, make it into a external monitor.

The main thing I need to know is, are the connector wirings pretty standard on all laptops? Where can I find a schematic diagram, would be nice if iFixIt make a adaptor.

TIA

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan -1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

If were only so simple ;-{

There are just to many different inter-connection types as well as sizes that would make it very hard to make such a adapter.

Frankly, the cost of a cheap LCD TV which has a VGA or DVI connection is just cheaper in the long haul.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

rich1812, lets start with this:-) What is the number on the back of the LCD (manufacturer or model number)? Armed with that, you can look for a datasheet and see what other devices uses that model LCD. You will most likely need an inverter circuit, a video circuit and a driver circuit. There are universal LCD Display driver controller boards out, that may help you to convert a display to a monitor. I purchased one through an online auction a couple of years ago, for something like $30, and it worked for me. Check on something like this.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

2 Yorum:

Thanks all for the reply.

Actually it seems easier than I thought. After some Googleing, I found this link, precisely what I need! It will be a good weekend project :)

http://www.instructables.com/id/How-to-C...

tarafından

Like I said, all you need is a controller board:-) just like it is mentioned in your link at instructables.com Best of luck to you.

tarafından

Yorum Ekle

Yanıtını ekle

rich1812 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 15

Son 30 gün: 15

Her zaman: 208