1.5 Core Solo, 1.66 or 1.83 Core Duo, or 1.83 or 2 GHz Core 2 Duo processor

188 Soru Tümünü görüntüle

Mac mini does not see Sata III SSD at boot

Mac mini 2006 (Core Duo 1.66) does not see SSD (SATA III, Samsung 840 120 Gbyte) disk to boot. SSD fully formatted and Mountain Lion installed, can boot from this if use mac mini in target firewire mode on another mac. Chimes at powerup but then blank screen with folder/? mark and 'crossed circle' icon blinking. Suspect firmware does not recognize SSD? If boot mini from external disk, can see and use the SSD internally mounted. Any ideas? Thanks

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

A couple of problems here. The maximum operating system for this machine is 10.6.8. http://everymac.com/systems/apple/mac_mi...

Second, your BUS speed is Serial ATA (1.5 Gb/s)

I saw no jumpers on this drive. You might be happy with a Seagate Momentus XT hybrid drive that has 8 GB of flash storage plus 500 GB of standard storage. I've found these drives to be noticeably faster. 500 GB SSD Hybrid 2.5" Hard Drive

500 GB SSD Hybrid 2.5" Hard Drive Resmi

Ürün

500 GB SSD Hybrid 2.5" Hard Drive

$74,99

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

Thanks for comment and suggestion. No jumpers on drive, supposed to fall back to Sata I, but doesn't seem to or Intel chipset doesn't recognize. I think I"ll have to try a hybrid drive, or look for an old SSD Sata 1, if I want to speed things up. I can install Lion as external drive then remove plist from library, and it boots ok. Just using as a media server and a bit slow these days..but still running strong. Thanks again.

tarafından

Yorum Ekle

Yanıtını ekle

Scott sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 3

Her zaman: 748