tried removing the fan but broke the connection

Hi,

I was trying to remove the fan and broke off the connection to the logic board? is it now my only choice to replace the entire logic board? I tried soldering the piece back and it seems ridiculously tiny with four connections.

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

Yorumlar:

licata59, you said " tried soldering the piece back", post an image of your connector and the solder job with your question. Here is a guide on how to add images Adding images to an existing answer

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

A professional electronics repair shop might be able to bail you out. If you haven't damaged the board. Soldering computer components to logic boards requires special tools, solder & lots and lots of experience.

If the board is damaged the yes you'll have to replace it. Pay close attention to how connectors disconnect as you work on the old board (Study the guide, not just read it). Many DIYers tear the ends off cables & connectors pulling the wrong direction, or not first unlocking cams.

If this Answer is helpful please remember to return and mark it Accepted.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

licata59 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 119